nintendo switch kickstand This is a topic that many people are looking for. newyorkcityvoices.org is a channel providing useful information about learning, life, digital marketing and online courses …. it will help you have an overview and solid multi-faceted knowledge . Today, newyorkcityvoices.org would like to introduce to you Fixing the terrible Kickstand on the Nintendo Switch. Following along are instructions in the video below:
“My kickstand has been nessentially useless since just a few months nafter getting the damn damn thing. It wasn t even strong enough nto hold the switch up anymore i it was because i replaced the back of the switch once and maybe that loosened it up somehow that was a terrible look anyway regardless. I know a lot of people have the same problem that i have and i ve been wanting to nmake this video for awhile. I found some things that will nfix my flimsy kickstand issue.
One of them is easy and one nof them is a little harder. But we ll see which one is best for you assuming you have the same problem or maybe you lost yours or maybe. You just wanna prevent it nfrom happening in the future video gaming shooting. It s probably not your fault.
That your kickstand. Got crappy. It s a flimsy piece of plastic so after awhile. It just nkind of looses its rigidity.
The kickstand is held in by this little bracket inside the switch. It sits behind the back of the housing. It s meant to hold the kickstand in with light pressure from the sides. But after extending the nkickstand out over and over or perhaps ever more damaging taking the kickstand out over and over this piece loses that pressure or maybe the socket nwears down.
I don t know. But a combination between nthis piece. Getting crappy or maybe the ball joints on nthe kickstand getting crappy your switch is gonna start to do this clunking so we have here the nyko nkickstand triple pack and this generic one made by yoowa the yoowa one comes with a little piece that goes on the inside nand requires. Some assembly.
It s not too invasive. It njust requires a wide tip 0. And a 00 phillips head screwdriver. I expected the yoowa sorry i expected that one to work better since it comes with the assembly piece.
But we re gonna try both nbecause you never know nyko used to sell a metal one. But i don t see that for sale anymore. So this plastic triple npack will have to do it comes with a black stand a clear one and an atomic purple. Unfortunately.
The atomic purple doesn t look as cool as it sounds. I just went with the regular ole black you definitely don t need three. I don t know why it comes with three. But it s only 13.
So it s nnot much more expensive then any of the single nones that are out there maybe if one gets loose eventually you can swap it out for none of the other colors. The back has this weird bump on it it allows you to fit an nextra micro sd card. In there. This is a cool idea.
But mine got stuck and was a bitch to get out so probably just don t do that anyway. The important thing here is whether or not it nactually fixes. The issue and i was shocked to find out that it did a really good job installation is as easy as snapping it in and it fixed my issue entirely it doesn t fall over like it used to and when i do manage to nknock the switch over the kickstand doesn t nfly out like it used to i don t really like how the back juts out. I kinda wish it was flush.
But that s such a minor detail for something that nfixes. My problem so well and so cheaply and so easily so i would definitely nrecommend this nyko. One maybe give one to a friend nand hold on to an extra one just in case. It gets loose again i could ve just left it there.
But i had to see if this nyoowa one fixed. The problem. I m sorry it sounds so much nbetter when you yell it this wouldn t be a very interesting video. If i just gave you one solution i gotta try em all out you know this kickstand requires a nlittle bit of extra work it does not come with any tools.
So you d have to provide them yourself. It does come with these nugly joystick grips. Which are dumb and useless. I use this ifixit screwdriver set that has more then enough tips for any electronic.
You might have the four screws in the back of the switch are y 0. Tips the rest are phillips 00. The instructions are very easy to follow this isn t a tutorial so njust follow the pictures and make sure you put the nscrews in a safe spot. Not haphazardly placed on the table.
Like i did if one of your screws. Feels stripped or you have a particularly nhard time getting it out try using a rubber band nto help fill in the gaps or maybe. It s just as simple as using a bigger screwdriver that made me feel a little stupid. This kickstand is plastic.
But the piece that goes ninto. The back of the switch is metal. So this whole nthing is an upgrade. I made a pretty big mistake when i was trying to install this thing.
I was trying to remove the assembly from the kickstand itself. I was trying to pry them apart. Which is how you remove the nkickstand from the back plate. But that s apparently not nhow you install this one oh i m stupid it all stays as one piece you just slip it through this hole here in trying to pry it apart ni might have slightly bent.
The assembly making it looser so to fix this i just mashed it closed and that actually worked it s not a stupid idea. If nit works. Remember that upbeat music. So this kickstand will also nfix your problem pretty well mine was still slightly nflimsier then the nyko one.
But it also does the job just fine. I like this because it looks like the normal stock switch kickstand the little rubber bit on the bottom is of lesser quality notherwise. It s just fine this took me probably less nthan 10 minutes in total to do it really wasn t that hard. But i probably would ve njust stuck to the nyko one this yoowa one.
I m sorry this one cost about 11. So it s 2 cheaper then the nyko one you need to provide your own screwdriver and it takes about 10 minutes to install which isn t a lot. But it s a lot more then the one second then the nnyko one takes to install you know upon further review. They actually have ones on namazon that are the same thing.
But they come with the nscrewdrivers for a few bucks. More and also it looks they re nall the same generic ones. Except for the nyko. One the nyko one felt more rigid.
Which doesn t make much sense to me considering that the other one replaced the whole inside assembly either i bent it or maybe. It s just just know that once this one is in there you re not gonna be able to snap it off you have to unscrew the nwhole thing to get it off. But like why would you nwanna remove it anyway. I think the only reason that nit s removable on the switch is so that you don t break it off it would be pretty easy for a nchild maybe to break it off if i smash down on it right now it would probably break off nso you just don t do that i used to not be able to go like this to like wake up my screen nand now look at that how awesome is that so i would say get the nyko one unless you want it to look nlike.
A stock nintendo switch. And you have the tools nto install it yourself amazon links to all the nthings that i talk about will be in the description nbelow as always now i finally get to play my switch in tabletop mode. Again yay ni. m never gonna do that who am i kidding so what do you guys hands clapping think about the switch.
Kickstand is yours. Getting crappy is this something that fixes your problem or is yours. Just fine leave it in the comments below. I be on twitter and any nand.
All of this other social media garbage i uploaded a video nyesterday on goggle stadia. So if you missed that go check that out also i uploaded a video today on my brand new channel nyouttubecom. Bobwulff spelled like that that video is me. And my ndad.
No saw ka. Eating steak. So enjoy that one also black friday is coming up and apparently all of nour apparel is 20 off we sold out of a lot of stuff. But i m pretty sure this nshirt s still there we don t we only have nthis shirt this hoodie this beanie for some reason and this hat.
But it s all 20 off of this price. So that s a pretty good deal and you could look like nthis whoa. Or this wow so check that out and get it while you can cause. I haven t restocked in awhile.
And we sold out of a lot of stuff. So you gotta get there nwhile. The gettings good. I gotta end this video.
Anyway. The most important nthing that you could do and the easiest thing to help support us is just subscribe to nthe channel. That s it make it as far into the video nas. You did that s great congratulations to you and share this video with a friend.
A friend who might have a nflimsy kickstand help em out ” ..
Thank you for watching all the articles on the topic Fixing the terrible Kickstand on the Nintendo Switch. All shares of newyorkcityvoices.org are very good. We hope you are satisfied with the article. For any questions, please leave a comment below. Hopefully you guys support our website even more.