what is lag switch This is a topic that many people are looking for. newyorkcityvoices.org is a channel providing useful information about learning, life, digital marketing and online courses …. it will help you have an overview and solid multi-faceted knowledge . Today, newyorkcityvoices.org would like to introduce to you How to Build a Lag Switch (HD). Following along are instructions in the video below:
” re going to show you how to build a lag switch you re going to to need a few items to start some box cutters wire cutters screwdriver a light and some cat5 cable now you can pick up a light switch at any hardware store for about a dollar take your cat5 cable. We re using a 25 footer here. We ve gone straight to the center then we are carefully removing all the plastic coating from the outside we want to expose the internal wiring. But we don t want to cut through it just yet what you want to do is locate the orange wire.
Now sometimes these come wrapped up around each other so look for the solid orange. We ve gone ahead and cut it here as you can see we re untwisting one end to get it free now we re going to lengthen a little bit..
Because we don t have a lot of room to work with now we ve got to expand it do the other side as well be very careful with your plate. Once you re all done unwrap. The remainder of the wire. And get your two orange wires.
Free and clear from the rest of the wires. Now take your wire cutters put them on a low setting..
You might have to play around with this to find the right setting. And you want to remove that orange sheathing to expose the copper on the inside you now we have both copper wires exposed. We re going to wrap them around the ports on the light switch. What we re effectively doing is creating a full circuit.
So when the light switch is on the data flow will remain constant and when it s off it ll cut the data flow make sure you wrap it around a few times. You don t want this breaking off and take your screwdriver and secure..
It the screws and the lights. Which should go right down and enable you to hold the copper wire in place maybe maybe once you have both copper wires secured what you need to do is take some duct tape or some electrical tape. Whichever you have laying around and wrap it around the exposed wiring this will just clean things up a little bit more now we ve gone ahead and done that now let s put it to the test. And see what we can do with this thing.
So let s say you re playing an online game you and another guy are facing off well view or to flip on your lag switch you would appear frozen to him in the meantime you can run behind him flip it back on and as the server resyncs. You will end up behind him..
Where you can do whatever you want hey you re number. One good job just make sure not to do it too much. People don t like cheaters be sure to come check us out on twitter. Where you can stay up to date on all the latest household hacker news.
” ..
Thank you for watching all the articles on the topic How to Build a Lag Switch (HD). All shares of newyorkcityvoices.org are very good. We hope you are satisfied with the article. For any questions, please leave a comment below. Hopefully you guys support our website even more.
description:
tags:
