iota battery charger This is a topic that many people are looking for. newyorkcityvoices.org is a channel providing useful information about learning, life, digital marketing and online courses …. it will help you have an overview and solid multi-faceted knowledge . Today, newyorkcityvoices.org would like to introduce to you IOTA DLS Series Tutorial – Product Features, FAQs, Troubleshooting and more…. Following along are instructions in the video below:
“Iota dls series battery charger and power converter is a state of the art switch switch mode. Apply widely used throughout such as rv solar electric vehicle and telecommunication applications to name a few the dls takes ac voltage and converts it at the dc power for operating lights radios and other dc equipment and for charging a battery supply. The dls series converts ac to dc voltage not to be confused with an inverter which inverts dc voltage into ac power the dls series offers output voltage models of 12 volts dc for charging a single 12 volt battery 24 volts for charging two 12 volt. Batteries.
And 48. Volts. For charging a bank of four 12 volt batteries dls models are available for both 120 volt ac input and for 240 volt ac input the dls series includes models for a variety of amperage levels ranging from 15 amps to 90 amps available averages will vary depending on the input or output voltage models you are using because i o to offer so many models for different input output and amperage requirements. It makes versatile family of battery charging and power supply designs available.
Additionally. Iota dls charges can be connected in series or parallel for even greater capability when a dls charger is connected in series the output voltage is multiplied by the number of units in the series with no change in amperage level. For example. Three 12 volt.
45. Amp. Chargers. In series with deliver 36 volts dc.
At 45 amps. When a dls charger is connected in parallel the amperage level is multiplied with no effect on output voltage. For instance. Three 12 volt.
45. Amp. Dls. Units will provide 12 volt dc output at 135 amps.
The series and parallel capability of the dl s combined with the wide range of available models makes the dl s a powerful solution for virtually any ac dc application the iota dls is designed with the user in mind the dls delivers exceptionally clean dc output to ensure that dc equipment such as pumps motors or fans work perfectly and virtually no ac ripple to cause static or premature failure of radio or television equipment. The dls features reverse polarity protection fuses on the output of the unit. This provides protection against incorrect hookup to the battery and not to the ac input side of the circuitry. The fuses are standard blade type fuses that can be purchased at any automotive store.
The rating..
A number of fuses on the dl s. Depends on the model if a fuse needs to be replaced always replaced with the same rating and type of fuse. Some dl s models require only one fuse. It is not unusual to see a small plastic spacer in the empty fuse slot.
This simply helps maintain tension on a fuse during transit leaving the spacer in the few slot will not compare performance of the dl s. But dl s. Features proportional fan control this means that the fan speed is proportional to the operating temperature of the dl s. If the temperature is low the fan will only spin at the necessary speed to maintain the optimal operating temperature of the dl s.
And will increase speed as the unit demands more cooling. This feature prevents unwanted noise caused by the sudden starting of the fan and keeps operational noise of the dl s at a minimum. The dual voltage jack on the dl s. Allows for manual switching between normal stage and bulk stage charging the dual voltage jack is a simple rj jack and is located either on the end of the dl s.
Or on the top depending on the model. The dl s. Is provided with a small loop plug for inserting into the jack to activate the full charge and a decrease charge time to avoid overcharging. The battery be certain to remove the plug from the jack.
When the charge is complete most dl s models are ul listed for both the united states and canada and all iota units are covered by ieee oda s two year warranty. Iota also offers the iq for smart charge. Controller for use. With the dl s.
The iq for provides automatic for stage charge. Control for the battery. This delivers several benefits such as decreasing charge times. Preventing overcharging and maintaining the battery when not in use stage.
One is the bulk stage this increases. The output voltage of the dl s to charge the battery quickly stage two is the absorption stage the iq four drops the voltage and holds the battery in the absorption phase for a controlled period to ensure a complete and full charge stage. Three is the float stage and is often referred to as the trickle phase as batteries tend to self discharge. This stage maintains the full charge while avoiding the gassing caused by overcharging stage.
4..
Is the equalization charge. If the battery remains in the float stage for an extended period. The iq4 cycles. The battery through the stages essentially exercising the battery.
The benefit of this process is that it prevents premature battery. Failure by dissolving any sulfate layers that accumulate on the battery plates and prevents battery. Stratification. The iq.
4. Pendant is provided with a 10 inch. Cable for connection to the dls installation is easy simply plug the cable into the dual voltage jack of the dls. The charge control circuitry is then automatically activated the iq.
4. Is also available as a built in addition to the dls. Dls units with the built in iq. 4.
Will indicate iq. 4. On the label and the dual voltage. Jack is disabled iota customers often have questions regarding their battery charging application.
What is the correct voltage for. Charging my. Battery typical charging voltage for a. Battery is 23.
5. Volts per cell for a 12 volt battery. Which contains 6 cells. This would be 14.
Point one volts..
A 12 volt. Dls charger. Will deliver a charge of 13 point. 6 in the float stage and up to 14 point.
8. Volts in the bulk stage. Always refer to the battery manufacturer specifications for the recommended voltage for your battery. How long will it take for the iota charger to charge my batteries the length of charge time is dependent on many factors such as the size of the battery.
The amount. The battery has been discharged the dls model. You re using for your battery. And the length and gauge of the connections to the battery.
Considering these factors. A charge time can range anywhere between 2 to 24 hours. How does temperature affect battery charging the optimal operating temperature for a battery is about 78 degrees fahrenheit colder temperatures decrease battery capacity and require a higher voltage for complete charge warmer temperatures caused batteries to self discharge faster and run the risk of overcharging these and other battery. Charging fa q.
s are available on the iota website at wwe battleground for 120 volts ac. Or 240 volts ac. If you re using a 240 volt. Dls.
If the ac supply is correct. You will need to check the output of the dls rv applications require the presence of a circuit breaker between the battery and charger. If a circuit breaker or fuse is present reconnect the ac supply turn off the circuit breaker or remove. The fuse and test the output voltage of the dls across the terminals.
Make sure the dual voltage plug is not inserted into the jack. If you are using a 12 volt dls the output voltage should be 13 point 6 volts for other voltage models refer to the product specifications for the correct output voltage a correct voltage indicates that the dls is operating properly. If no circuit breaker is present disconnect the negative lead from the dls and measure. The dc output.
If there s no output or low output check the fuses on the dls..
If they are blown check for correct polarity on the battery connections replace the fuses and retest. If the voltage is still incorrect contact our technical services team. Our mission. A toyota is to provide the best service in the industry for questions or comments.
You can reach us at one eight hundred eight six six four six eight two or visit us online at wwe and technical service. Contact. Information is listed on the contacts page. The iota website also provides access to a large library of product documentation from the iota power products page.
You can visit our technical library. Here you can access product specifications. Installation manuals and useful reference tools. Such as our faq section.
Or our product cross. Reference sheet. Iota. Power products are covered by our two year warranty should return be necessary you can begin the process by downloading our rma form.
Which can be found in our technical library to complete the rma form you will need the date of purchase from your purchase receipt. If you no longer have the receipt the date code can be found on the side of the dls. The date is listed in month day year format. Send the completed form to our rma e mail address our ma.
At iota engineering. Comm. The address is also listed on the contacts page of our website as always should you have any questions regarding. The iota dls product for your application.
Please do not hesitate to contact us at one eight hundred eighty six four six eight two or visit wwii engineering comm for more ” ..
Thank you for watching all the articles on the topic IOTA DLS Series Tutorial – Product Features, FAQs, Troubleshooting and more…. All shares of newyorkcityvoices.org are very good. We hope you are satisfied with the article. For any questions, please leave a comment below. Hopefully you guys support our website even more.
description:
tags:
