replace car cigarette lighter with usb This is a topic that many people are looking for. newyorkcityvoices.org is a channel providing useful information about learning, life, digital marketing and online courses …. it will help you have an overview and solid multi-faceted knowledge . Today, newyorkcityvoices.org would like to introduce to you Replacing cigarette lighter with USB charging port on a 2008 GMC Yukon.. Following along are instructions in the video below:
“Right right here. We have a 2008 gmc yukon and i m going to remove remove one of my cigarette lighters to replace. It with one of these guys right that has the usb low you could charge phones tablets. Whatnot and basically eliminate the use of these guys right here all right so the first thing we need to do is remove this bezel.
It s held by six clicks. Seven clips. I believe one two three four five six seven for that i will use my popping tool right here..
I also have a screw driver force all my my wire cutters first and what else i know i have a person or someone a pick. What i m going to do first is i m going to remove this cigarette lighter hopefully you guys can see right here. It has this little hole right here what you want to do is. Which design and pop it up that way the little clip does not hold it in anymore.
So you do that to this bottom one there s another one on top all right i already did that once you do that this will slide out now it will be connected. I went ahead and cut off the wires already. But as you can see that s i would be this right here you just get your screwdriver and pop it off little by little one side to the other let me pause..
The song to do that real quick alright. Now. This just after you widget out this just popped up from here you want to force this out a little bit and then what s your tool. In there that we can start popping it out let s go ahead and do that alright so i was able to wedge it in papi s out so work your way around swing around here at the bottom.
And let me do the other side alright. So i ve got my bezel out there goes those ones actually nine of them. So..
What you want to do now is take a screw on all sides. This is 932 unscrew. This and that one alright with those screws out the way you could this comes off. And then this is where the other cigarette.
Lighter was hooked on so what i m going to do i ll cut them. And i m going to crimp. Some of these right here those will fit behind here snap in and out really easily so..
I m going ahead. And do that real quick alright. So i ve got these crimps on there what you want to do now is take this off and then put it through here fasten that and then plug it up and then installation is reversed. You put your screws back and then your your bezel and your set hope.
Thank you for watching all the articles on the topic Replacing cigarette lighter with USB charging port on a 2008 GMC Yukon.. All shares of newyorkcityvoices.org are very good. We hope you are satisfied with the article. For any questions, please leave a comment below. Hopefully you guys support our website even more.