holding a controller This is a topic that many people are looking for. newyorkcityvoices.org is a channel providing useful information about learning, life, digital marketing and online courses …. it will help you have an overview and solid multi-faceted knowledge . Today, newyorkcityvoices.org would like to introduce to you This is how i hold the controller…. Following along are instructions in the video below:
“A lot of people have been saying they hold it like me. But they have have sent me proof and they do not hold like me unless i see actual of someone holding exactly like me with proof of them playing i m gonna believe i m the only one probably in the world that holds it like this. But i just want to see proof if you know anyone the whores like me please dm. Me.
And everyone s mean santa also hold like chicks e or sway. I m just gonna show proof on screen that i don t hold like chicks he holds it completely differently as you can see on screen. They re completely different i use my palm while chick seymour uses his thumbs. He more plays claw.
I don t see where the comparison comes into play over yeah they re completely different. I don t think you guys actually know i hold the controller and i m gonna show you everything all my fingers do what my palms do what everything does in my hands to actually hold the controller like this so there ll be a more in depth. Explanation of how axial the controller. So you guys actually get an understanding of how i hold it and don t say i ll hold like someone else.
So yeah. It s gonna show a more in depth way. And i ll get into that explanation right now so pretty much this is my left palm. My left palm and moves the left analog stick.
So i just have to push it forward as i have autorun on or whatever. It s called and then this part of my left palm pretty much under my pinkie uses all these parts so if you want to get my inventory out. I use all that i m pretty sure i use my left thumb for this one as well and for my l2 and l1. I just use my pinky as that just rest there on top of this side of the controller on the left side.
So that s the left side of the controller and on the right side. I use my left thumb to aim and move around that s my movement. So this is my left thumb radio and then for the right side. Which is this hand.
I use pretty much basic my thumb for every ting on here and then for the r2 and r1..
I use my middle finger for r2 and my pointy finger for r1. So that s pretty much how i do it i have my palm resting on this side for my left hand and my palm resting on this side for my right hand. And yeah. It makes up a pretty weird dream again flips now me using the hand cam.
And i m also going to show some nasty clips. I got without the hand cam. So i hope you guys enjoyed the video. If you did make sure to drop a like and a sub.
If you knew you also share this video that would be highly appreciated this is probably the only way i m gonna blow up and hopefully i can get noticed for the way i hold the controller so if you can go to my twitter retweet. My tweets also share the video on instagram youtube. All that good shit and yeah. Let s try to make this video blow up guys.
If you did enjoy it as i said subscribe and like if you re new and i m out peace definitely recommend it to anyone who s looking for you know a low budget entry into the headsets for you know console gaming. It definitely it helps me out because you know i m a mom and i m a wife and i wake up early in the morning want to play some games. But i don t want to disturb anyone so i just put these bad boys on and and i play some games. I mean the sound quality is awesome great on bass boost in the headset.
I mean. It s just a really good the sound quality. Really really sounds good and for sixty dollars. You can t go wrong with that so definitely if you live in our apartment.
Or you have roommates or whatever. The case may be stay up late and you want to really hear what you re playing definitely check these bad boys out you know you will start when once you put these on and play a game. You ll be hearing things that you never heard before when you played it without the headset. So yeah.
Give them a check out it s the turtle beach ear force..
X. 1. Xn. Yeah and enjoy them enjoy.
and grab a microfiber cloth and just to wipe the surface clean and so that it has no streaks or smudges and now for the third step you re gonna want to measure your windows lengthwise and widthwise make sure you measure your windows on the inside border trim just so that you get only the glasses measurement and once you re done with that we can go ahead and start the measuring and cutting process for the film. So since i ve already cleaned my windows and i have made it streak free and measured. It i m gonna go ahead and start with the measuring of the film and start to cut it and you want to layer your workstation with a piece of cardboard or something just so that you don t end up scratching it up or cutting it because i m going to be using an exacto knife to make the cuts. Nice and precise instead of using the scissors.
So let s get started with that and now that we have the two pieces cut out just because i have to match the width of my window. So i had to cut an extra portion out just to cover the whole entire window. So now we can go ahead and start the installation on the window itself so i m gonna leave you guys right here so what you re gonna want to do is spray a nice amount of some soapy water solution onto the window itself and basically they said he said sticks by statics so that s the way it s gonna be i m gonna step on there and i m gonna start by putting the bigger portion up at the top. So you re gonna want to remove the protective film from the actual and once you do that you re just gonna want to line it up with the portion of the window or with your window itself and once you have it laid on your window just like this at this point you can go ahead and take your squeegee and just squeegee out the excess soapy water that we have under there all right and now that we have the top portion installed let s go ahead and install that little slice that we had from for the bottom.
And i cut this so that it will line up with the top portion. So just if you do this you just make sure that both pieces line up so it looks nice and then as you can see i have a little piece of extra film. That s hanging off the bottom here. So we need to do is just give that a trim and just soak up the extra solution that s on there and if you still see some air bubbles.
What i like to do is put the paper towel over the squeegee from point like this and just give it a nice cuts and pull and in doing this you won t damage. And that s about it for this window. And once these soapy water solution that we made dries off on the back this window film will not move from where it is it won t be sliding around or even moving just a little bit. And that just takes a little bit of drying time so i ll see you guys in a little while and in the meantime.
You re gonna go ahead and install this on another window. And we ll see how the results are alright you guys so we ve let these films dry on this window that we did do the installation on i also did install this film on another window that we re that we re gonna go ahead and take a look at now this window as you can see i don t have much sunlight coming in there because it is right next to another house. But you can take a look at how much more privacy. This allows you to have on any window.
That you do have in your house..
Now taking a look at it because i did leave the top one unfiltered. Because i wanted to show you guys just how much more of a difference. It creates so you can see that the top one you can see so much right through the window. But at the bottom one you can t see anything that s on the other side.
And because you can t see anything on the other side that means. No one can see what s inside. And that s one great thing about these window films another great thing. Is that these window films are very energy.
Efficient because they do bounce off. 96 of those uv rays that can be harmful to your furniture. But also do create an extra set of heat coming in through your windows. Now what i love about these window films is how nicely they settle onto the window once they re on the window.
You can t even move them or budge. Them and they don t peel off the only way to peel them off is basically to get them from the edges and pull them straight off. They won t smudge they won t shift or anything like that once they ve properly dried onto the windows which doesn t take too long it takes about thirty minutes for them to properly dry as long as you ve squeegeed out all the solution that s underneath it one thing that you guys will notice is that on the extra piece that i had to layer because it wasn t wide enough to fit this exact window is that this piece that i did cut and layer on there i didn t cut it the exact way i figured i would have where i wanted to match up all these bamboo plants. So that everything creates one nice flow.
And it doesn t look. There s an extra piece there that was a separate cut. But as you guys can see i didn t do that well. But with a little bit of time and taking a little bit more effort with matching everything up it would be possible now looking at how i did the cut here as well for this extra piece.
It is a little bit wavy. I didn t do a perfectly straight cut and that s something that i should have taken a little bit more time and done because it would have created a nicer installation. Although standing away from the window itself you can t even really notice that there s an extra piece put on there and here is the other window install this window film on as you guys can see because there s so much sunlight coming in through this window it looks so much more beautiful you can see that wherever the flowers on the bamboo plants are you can see that really nice rainbow effect. And it looks beautiful that s just the sunrays bouncing through the 3d print that s on these films.
And it looks gorgeous..
What i love about these window films is in the sunlight. They look spectacular. But it doesn t in any way hinder the ability of the privacy that they do offer as you guys can see i replay. Also did do one installation just on the bottom of this window and left the top one clear.
And you can really see the difference that these films to create and with that difference you really do get that added bit of privacy. And it also saves you on your energy costs all right you guys. And i just wanted to show you a quick look at how these films look in the nighttime. Now floodlight they just go on in the backyard over there.
But as you can see through the window film part the part of the window that is covered with the window film. You can t see that much light coming out from it and also if you take a look through the top window. You ll see a hell of a lot of light coming from it and also you can see straight to the other person s window right through it actually and when you look through the filming portion that i have on this window. Here.
You can t see anything through it and as that bloodline goes and shuts off there you can see just how much more privacy you get by having these window films applied to your windows all right you guys. And that just about concludes. This video on how to install these awesome window film by rabbit go if you guys like this video. And you guys want to see more videos just like this one go ahead and consider subscribing to my channel.
I want to thank you guys for watching. And i hope this did help out with any ideas you guys may be having or with just the installation process. Thank you guys for watching. And i ll see you next time ” .
Thank you for watching all the articles on the topic This is how i hold the controller…. All shares of newyorkcityvoices.org are very good. We hope you are satisfied with the article. For any questions, please leave a comment below. Hopefully you guys support our website even more.