totem acoustics This is a topic that many people are looking for. newyorkcityvoices.org is a channel providing useful information about learning, life, digital marketing and online courses …. it will help you have an overview and solid multi-faceted knowledge . Today, newyorkcityvoices.org would like to introduce to you Totem Acoustic Forest Speaker Review with Clint the Audio Guy. Following along are instructions in the video below:
“How s everybody doing today clint. The audio guy back here to show you another another speaker. I know i know totem fanboy. But had these in the store and want to show them to you so.
This is the totem forest. This speaker has been in line for quite a while totem generally doesn t get rid of models every couple years like a lot of companies they put it in the line. If it s good it stays in the line forever. Unless.
They have a good reason to change it so they do incremental updates sometimes they ll have a signature model or they ll improve the you know capacitors in the crossover or something if something sounds better. But for the most part it s the same design. So the forest here is the model just above the hawk in the us right now these are about forty two hundred dollars. A pair.
The the construction on the forest is another level up from the rest of the to eight hours. It s very rigid enclosure. Very solid when you knock on it i believe they go to a solid wood face instead of using mdf in the front. So the baffles more rigid the totem excels at doing small two way designs and whenever i play a totem for somebody the first question they ask where s the subwoofer.
They always always have to know where s this up and i say there is no sub. Because that s just the totem playing full range sound. That you wouldn t expect out of a small speaker. So we ve got a six and a half inch woofer and this one this one does it more so than just about anything six and a half inch woofer.
It plays very deep. There s a three inch voice coil on this driver so a lot of motor structure. There we have aluminum dome tweeter. I believe this is a c s twitter.
It s a caesar scan street. But i think is the c s anyway not important they use very high quality crossover components. So they have air core inductors. The of really high quality capacitors.
They re actually kind of vince s kind of the mad scientist over at odom. And they listen to different capacitors to see which one sounds best. They don t just pick a capacitor that s the price point for that has the value that they need to actually listen to a bunch of capacitors to see which one sounds the best so not a lot to see almost no company does that they also match the capacitors or the crossover components to each. Other so these are built in pairs.
So the values on this capacitor. You know they re measured and they re matched to the other speaker in the pair now in the case of the forest signature. They move the decimal point and they match them ten times. Closer essentially so the the signature model gets a special finish it gets the adjustable foot that leans the tower back to better time align.
The drivers. And it gets crossover components that are just taken to the the next level or several levels up they re already very good in the forest. Though the this speaker. If you re looking for a speaker.
That you know you like the totem sign you like that holographic soundstage and the imaging that they can produce. But you need a speaker to be able to rock out a little bit you want to turn it up and feel it a little bit or if you re using it in a home theater application. Where you need some some more substantial output. That s really the limitations of small to a designs well this is the first speaker that i think can do that you re getting hundred and ten decibel peaks out of this one so that can really cover you for most applications as far as output is concerned the smaller.
The smaller towers. They they can sound great and at any normal listening level they re gonna sound good in your room. But if you really want to crank them you re going to really push them a little bit too hard so as far as power requirements go these they say on totems website. They re a tomes by the way.
And the sensitivity is 87 db. So not terribly hard to drive. But they do benefit from better quality amplification. Just like any speaker.
The same say they recommend on totem sight between 50 and 200 watts. I m a more power kind of guy. So 200. Watts can sound great actually this macintosh receiver sounds really good on them.
This is the new i ll show you this in another video. But this is the new mhc 7200. It s got a tuner in 200 watts per channel. Sounds fantastic on these it s a very high current design.
So really i would say i would say shoot for more than a hundred watts per channel. They say 50 to 100 but 100 watts per channel. If you got a tube amp and more than that if you re going solid. State.
Unless you have a macintosh amp. Or something really high current. Like that the force comes with what totin calls their claw feet. These are machined out of aluminum.
And they have a little divot in the bottom that fits this ball bearing to decouple them from the floor. But it s pretty cool a little foot system they got one on the front two on the back on the back totems using the wbt gold binding posts. It s a very high end binding post right the best binding post manufacturer in the world totem uses them on several of their designs. But the forest gets the gold ones.
The signature model might get the platinum ones. I m not sure offhand. But very cool they have some jumpers in here and to buy a wire or biamp. You can pull those jumpers out and use all four terminals or you can leave them in and just use the bottoms or the tops or one tap one bottom.
But anyway. The the low the bottom hole here is a mass loading chamber. So you can add weight to the bottom to add more stability and they also it also will dampen the bass a little bit so depending on what kind of surface you re setting the speaker on it can have an effect and you can tune it to taste up above. Which is out of the frame here okay up above is the port tube.
So this is the port. So don t add mass here. Okay so screw up the speaker. You want to add it to the hole in the bottom.
There and then they have like a tape disc that can stick over it just so your see here mass loading material doesn t slip out i always say if you re gonna load. It start light like less than five pounds and see what you think about the sound ultimately. I think somewhere between five and eight pounds is perfect for for me for a plush carpet like this but you can experiment and see what you like just make sure you re they re both the same well thanks for watching. And you get a chance to listen to some forced go ahead and do it you you won t be disappointed.
It s a speaker that at at their price point. They sound as good or better than anything out there they just happen to be small uh. The force is thirty six inches tall. So three feet eight inches wide so they re very small in the room are the very spouse friendly.
Let s say the the soundstage amazingly. They dig down into the depths. Very well into the base. So it s it s an impressive little speaker and at the price point they compete with anything else i ve heard so they just happened to be compact.
You know there s bigger speakers for the money. But is that what you want you want bigger do you want better you know so anyway check them out thanks for watching. And we ll see you guys on the next one ” ..
Thank you for watching all the articles on the topic Totem Acoustic Forest Speaker Review with Clint the Audio Guy. All shares of newyorkcityvoices.org are very good. We hope you are satisfied with the article. For any questions, please leave a comment below. Hopefully you guys support our website even more.