how to flush ac system after compressor failure This is a topic that many people are looking for. newyorkcityvoices.org is a channel providing useful information about learning, life, digital marketing and online courses …. it will help you have an overview and solid multi-faceted knowledge . Today, newyorkcityvoices.org would like to introduce to you Why Flushing AC Systems Doesnt Work. Following along are instructions in the video below:
Two three four rev up your engines. Its time for the scotty kilmer channel. Channel.
Today. Im going to show you why flushing an air conditioning system. When replace an air conditioning compressor doesnt work that well on modern cars now years ago.
If a compressor went bad youd flush the system out with some of this flush. The flush was poured inside this canister from this big gallon. Here.
Then an air hose was attached and the flush was flushed to the system to knock all the crud out and it used to work pretty good especially for flushing.
These condensers that are in front of the radiator for the ac system. But the fins that the refrigerant travels through are getting thinner and thinner. So they can make cars.
Cheaper and cheaper check this out. I cut a piece off of this evaporator look. How small these little holes are that it flows through heres a penny in comparison seem thinner than a penny and the refrigerant flows through these tiny holes and when i blow through it i have to blow as hard as i can just to get a tiny bit of flow.
So flush thats not going to cut the mustard. Its not going to flush any crud out of these holes. And thats the main reason.
Im making this video today.
Ive seen too many people change. A compressor flush out the system only to find days or months. Later the new compressor breaks.
Too because try as you might flushing. These tiny holes. Just isnt go to work.
Theres just too much surface area too small holes of holes cruds going to get stuck in the air. Its going to build up pressure. Its going to end up ruining.
A new compressor too and since the first place that the high pressure refrigerant goes.
Once the compressor compresses. The gas is the ac condenser. Its the part that normally gets clogged up.
So. If you have an air conditioning compressor that blows you can forget trying to flush the condenser out on a modern car because the holes inside are just too small for any flush to work in this case. Its really a good idea to replace the condenser.
I know theyre expensive. But if you price around ive often find chinese made brand new ones that cost less than one third of what a dealer factory unit costs and if you want your new compressor to last a long time. Its really a good idea to change the condenser too on a modern car.
Ive seen too many guys regretted that they didnt change the condenser and just flushed. It only come back months later and having to replace the compressor and the condenser all over again because in many modern cars parts are just made to be thrown away when they go bad and remember if you got any car questions. I now answer them live every saturday at 10 oclock in the morning on google events.
Thank you for watching all the articles on the topic Why Flushing AC Systems Doesnt Work. All shares of newyorkcityvoices.org are very good. We hope you are satisfied with the article. For any questions, please leave a comment below. Hopefully you guys support our website even more.